Sili-out 2 Silicate remover (360 and 720g), Microbe-Lift

For the effective and permanent removal of silicates in all saltwater and freshwater aquariums.

Developed on an aluminium base with a purity of 99%+.

Dosage:

Use 50 ml per 100 litres of water.

Advice:

• Always start with the recommended dosage and, if necessary, gradually increase up to 100 ml per 100 litres of water.
• Always wash Sili-Out 2 thoroughly with water first to remove abrasion.
• The ideal phosphate value in seawater aquaria should be between 0.02 and 0.05 mg.
• Ideally, Sili-Out 2 should be used in a fluidised bed filter or in a sock filter at a point with good circulation, e.g. external or internal filter.
• It is best to use it alternatively with Phos-Out 4 based on iron hydroxide every month, so that also unwanted iron and aluminium accumulations are avoided.