Elegant and flat design.
Available for fresh and salt water.
Anodised aluminium housing, natural colour.
Low voltage (24v) for safety.
Energy saving LED technology.
Characteristics:
- High-performance, low-consumption 5630 SMD LED (0.5w/LED)
- The best power (w) / length ratio on the market compared to similar screens.
- 30,000 hours of useful life
- Vertically and horizontally adjustable support. Fully adjustable supports in both length and height so that it can adapt to aquariums longer than the luminaire and bring them closer or further away from the surface. It can also be placed on an inclined plane with respect to the surface to produce special lighting effects.
- Size without supports: 300/400/600/900x78x16mm
- RGB+ system, individual white LEDs for power and RGB LEDs for color tone
- 4 channel controller. It allows you to control the power of each channel, adjusting the light to the needs of the aquarium both in power and color.
- IPX7 by insulation with epoxy resin. A thin layer of epoxy resin protects all the connections of the LED board so that nothing happens if the luminaire accidentally falls into water. At the same time, it allows the luminaire to be installed in places with high humidity.
Power depending on model:
RGB+ 30 | 24w |
RGB+ 40 | 31w |
RGB+60 | 46w |
RGB+90 | 70w |
How to configure 4 channel controller?
White or navy channel
You can adjust the intensity with the + or - buttons.
Press
The other 3 channels will remain off while you adjust the blue channel with the + and - buttons.
Press the
The blue color will be shown as you saved it and the red channel which can be adjusted.
Press the
Now you can dim the green color, but the blue and red colors will be displayed at the same time.
Press the
All channels will be displayed at the same time and you can adjust the white or marine channel.