WEIPRO ORP 3010 controller is designed to automate the control of ORP (Oxidation-Reduction Potential) level . The positive redox potential (oxidation) brings with it an acidification of the water (lower pH) in your aquarium, the opposite occurs with the reduction that bases it (increase in pH). Good control of water disinfection will require monitoring of the ORP.
This controller has an LED screen where you can view the ORP value of your aquarium water in real time. Additionally, you can connect your ozone generator to your controller to correct any abnormal ORP values .
It is a durable and reliable device with very simple operation , which will allow you to have your perfect aquarium without any effort.
It is suitable for both fresh water and salt water.
SPECIFICATIONS
- Model: ORP-3010
- Voltage: AC220~240V/50Hz
- Power: 2.5W
- Measurement range: -1999 ~ +1999 mV
- Control range: 0 ~ 1000mV
- Resolution: 1mV
- Accuracy: mV
- Cable (EU standard): 1.5 meters
OPERATING MODE
- Turn on the power.
- Connect the ORP electrode to the ORP terminal.
- Keep the ORP SET switch in ETposition. Meanwhile, keep the switch function set m to ETposition. Adjust the RP SETtill knob the display shows the ORP requirement. (Normally, the best ORP for plant aquarium is 60-235mV and for seawater aquarium is 300-400mV).
- Place the ORP electrode into the water and connect the ozonator with the controller, also keep the ORP switch function SET in RPposition. The ORP will be raised automatically with the ozonator.
Notice: The ORP will be different before and after raising, in the day and at night, also, it may fluctuate due to pH changes.